Cable Locators / Cable Tracers
CL 20 Cable Locator
The Cable Locator CL 20 is unchallenged for successful location in a variety of situations. Capable of locating long or short cables, inductive or directly coupled, using active transmitter frequencies or passive (50/60 Hz), the CL 20 is a lightweight, user friendly instrument in ergonomic design that delivers quick and accurate readings.
Main Features:
- Fast and exact location of position and laying depth of cables
- Intuitive operation – No special measurement knowledge required
- Graphics display with digital and barograph indication of signal strength
- Digital display of cable depth
- Current measurement for identification of target cable
- Automatic gain control
- 4 active search frequencies: 815 Hz, 8 kHz, 33 kHz, and 82 kHz
- Passive 50/60 Hz location of live cables
- Powerful frequency transmitter with automatic load matching
The audio frequency probe (AFP) is used in conjunction with the Protrac control unit and the TG 20/50 audio frequency transmitter to locate cable routes, cable faults, and joints. The core element of the new AFP is the 3D space coil, in which 3 coils are arranged in the x, y, z axes. This means signals from all 3 coils can be simultaneously displayed on the control unit and compares in real time.
Main Features:
- Route tracing of cables and metallic gas and water pipes
- Depth evaluation of cables and metallic pipes
- Cable detection on live lines
- Location of cable and line joints
TG 20/50 Audio Frequency Transmitter
The TG 20/50 is a portable, mains or battery operated audio frequency generator with incorporated charging unit. Together with an audio frequency receiver UL 30 and detecting rod SP 30, the TG 20/50 can be used for route tracing and depth evaluation of cables and metallic lines.
Main Features:
- 50 VA output power when connected with mains and 20 VA when battery operated
- Frequency 2 or 10 kHz, quartz stabilized (other frequencies on request)
- Automatic or manual impedance matching in 7 steps from 1 – 1000 Ohm
- Indication of input and output current
- Socket on side panel for connection of a loop antenna
- Lightweight and portable
TG 600 High Performance Audio Frequency Transmitter
The high performance Audio Frequency Transmitter TG 600 is specially designed for accurate location of cable faults and joints according to the twist method in connection with an audio frequency receiver UL 30 and detecting rod SP 30. The display of input and output current enables optimized impedance matching. A 600 VA and a 60 VA output power range are selectable. The 60 VA range is mainly used for route tracing and depth evaluation of cables.
Main Features:
- High output power 600 VA
- Frequency 2 or 10 kHz, quartz stabilized (other frequencies on request)
- Potential-free output
- Impedance matching in 8 steps, from 0.3 to 300 Ohm
- Selectable reactive current compensation for optimized power matching
- Thermal overload protection
- Indication of input and output current