
Fiber Optic Converters
In complex EMC testing environments bidirectional transmission of electrical signals into and out of the chamber is often required. For that purpose we offer a variety of different interfaces that convert electrical signals into optical signals and back. Converting the electrical signals into optical signals makes them immune against electrical fields. A sophisticated shielding and filtering concept on the fiber optic converters ensures that the interfaces are highly immune against radiation and do not deliver out any significant emission.
BROCHURE: PONTIS EMC PRODUCTS
DATASHEET: FIBER OPTIC CONVERTER OVERVIEW
Features:
- RF-Immunity: Antenna radiated 200 V/m, 200 MHz –18 GHz, ISO11452-2, CW, AM, PM / Stripline 200 V/m, 10 k – 1 GHz, ISO11452-5, CW, AM, PM
- Emission: EMC compliant to CISPR25 Class 5, 150 k – 4 GHz
- Mains powered or battery powered
- Set of 2 converters
- Variable fiber optic cable lengths (ST-ST or ST-FSMA)
- Muliti mode duplex fiber, 50/125 um
- Fiber optic patches (feed-through connectors for bulkhead connector panel)
CAN CONVERTER – foCAN
- High speed ISO11989-2
- 50 – 1000 kBaud data signaling rate
- Transparent, unbuffered data transmission
- Selectable CAN bus termination 120 Ohm, 60 Ohm or none
- Can operate with 24V vehicles
ETHERNET CONVERTER – foEthernet
- Switchable: 100MBit/s / 1GBit/s
- Bidirectional data transfer
- 1x RJ45 Ethernet port (4 port version available on request)
- ACK and network speed indication
AUTOMOTIVE ETHERNET – BroadR-Reach
- Designed for automotive connectivity applications
- Autodetect: 100Base-T1 / 1000Base-T1
- Two-way data transfer
USB CONVERTER – foUSB
- High speed (480 Mbps), full speed (12 Mbps) and low speed (1.5 Mbps) data signaling rate
- Unidirectional data transfer
- Converter 1 – type USB B to connect with a PC
- Converter 2 – type USB A to connect with any peripheral device
RS232 CONVERTER – foRS232
- 8 x In, 8 x Out, each channel “RxD + TxD, without handshake” or 4x, each channel “Rx + Tx + TRS + CTS, with handshake” data signaling rate
- Bidirectional data transfer
- Up to 115 kBaud data transfer rate
- Converter 1 – satellite (shielded)
- Converter 2 – transceiver (un-shielded)
HDMI CONVERTER – foHDMI
- Full HD 1080p, uncompressed
- Unidirectional, 10.2 GBit/s high speed duplex transmission
- HDMI up to version 1.2, real-time transmission without delay
- Converter 1 – transmitter to connect to signal source
- Converter 2 – receiver to connect with peripheral device
LIN CONVERTER – foLIN
- Up to 20kBit/s data signaling rate
- Bidirectional data transfer
- Can operate with 24V vehicles
- Switchable terminator
- Switchable power: from LIN-bus
E-VEHICLE CHARGING CONVERTER – foCarCharger
- Shielded transmission for car charging stations
- AC and DC charging
- PWM, PLC and CAN data communication
GPIB, RS485, VGA and FBAS converters also available. Please contact HV TECHNOLOGIES for further information.