The BL3-5G and BL10G baluns can be used to measure differential signals, for instance produced by free-space sensors for electromagnetic fields. The phase and amplitude balances are excellent and the frequency range is extremely wide. This allows faithful measurement of signals like pulses, for instance. The shielding effectiveness of the devices allows measurements in a disturbed environment. As these baluns are passive and all the ports are 50 ohm, they can be used in both directions.
Datasheet:
Example of Measurement Setup
A free-space derivative electromagnetic field sensor delivers two balanced pulse signals to the balun, which converts them to an unbalanced signal. To ensure noise-free measurement over long distances, the balun is connected through a fibre optic link to the measurement equipment installed in a shielded enclosure.
Montena PULSELab software application automatically configures the oscilloscope for pulse acquisition, display and storage in the control PC.
The BL3-5G and BL10G baluns can be used to measure differential signals, for instance produced by free-space sensors for electromagnetic fields. The phase and amplitude balances are excellent and the frequency range is extremely wide. This allows faithful measurement of signals like pulses, for instance. The shielding effectiveness of the devices allows measurements in a disturbed environment. As these baluns are passive and all the ports are 50 ohm, they can be used in both directions.
