ESDEX series generators represent the latest innovation in ESD testing up to 30 kV.
Designed and manufactured by EMC PARTNER AG, they are available in 8 kV, 16 kV, and 30 kV versions and support a wide range of interchangeable RC networks to ensure full compliance with the latest international standards, including IEC 61000-4-2 Ed.3, ISO 10605, RTCA DO-160 Section 25, and MIL-STD-461 CS118.
A comfortable and efficient ESD testing process is ensured by a perfectly balanced and ergonomically optimized design. The precisely engineered balance point allows effortless movement in any direction or angle, enabling long test sessions with minimal strain.
The large 4” capacitive touchscreen offers a wide viewing angle and excellent readability from any position. Compared to traditional resistive screens, it delivers a modern, fast, and highly responsive user experience.
Featuring cutting-edge components, advanced interface design, and state-of-the-art communication technology, the ESDEX series meets today’s demands for smart operation, modern connectivity, and high performance.
Its modular architecture provides maximum flexibility, allowing users to configure the generator precisely to their application requirements.
Key Characteristics
ESD Generators up to 30kV
Available in 8, 16 , and 30 kV
Exchangeable RC networks
Customizable with various options & features
Upgradeable 16 to 30 kV
Free lifelong firmware upgrades
Highlights
Ergonomic handling – perfectly balanced
4” large capacitive touchscreen
Intuitive and smart operation
Create user defined test plans
Programmable side buttons – single hand operation
Direct report generation on the generator (PDF, CSV, HTML)
Rechargeable battery – USB-C fast charging (80 min)
Standards:
IEC 61000-4-2
ISO 10605
MIL-STD-461 CS118
DO160 Section 25
FMC1278
GMW 3097
MIL-STD-331
JOTP-062
STANAG 4239
MIL-STD-883
GR78-CORE
JEDEC JS-001
| Standard | RC Network | ESDEX RC Network Options | |
|---|---|---|---|
| With Bleedoff | Without Bleedoff | ||
| IEC 61000-4-2 | 150pF / 330 Ω 200 pF / 50 Ω | NW-C150R330-B NW-C200R50-B | NW-C150R330 NW-C200R50 |
| ISO 10605 | 150pF / 330 Ω 150pF / 2000 Ω 330pF / 330 Ω 330pF / 2000 Ω | NW-C150R330-B NW-C150R2000-B NW-C330R330-B NW-C330R2000-B | NW-C150R330 NW-C150R2000 NW-C330R330 NW-C330R2000 |
| MIL-STD-461 CS118 | 150pF / 330 Ω | NW-C150R330-B | NW-C150R330 |
| DO-160 Sec25 | 150pF / 330 Ω | NW-C150R330-B | NW-C150R330 |
| MIL-STD-883 JEDEC JS-001 | 100pF / 1500 Ω | NW-C100R1500-B-M | NW-C100R1500-M |
| MIL-STD-331 | 500pF / 500 Ω 500pF / 5000 Ω | NW-C500R500-B NW-C500R5000-B | NW-C500R500 NW-C500R5000 |
Accessories:
A complete range of ESD testing accessories is available to complete a professional ESD test setup according to your exact needs.
| ESD-TARGET | 2 Ohm gold plated target. acc. to IEC 61000-4-2 and ISO 10605. Including SMA cable & 2 x20dB attenuators. Max. 30kV ESD voltage |  |
| ESD-VERI-TARGET | Adapter for ESD-TARGET calibration. Gold plated. Lifetime protection against corrosion. N-type male connector on input side |  |
| ESD-VERI-TARGET-ADAPTER | Calibration Adapter for ESD-VERI-TARGET. Gold plated. Lifetime protection against corrosion. N-type female connector on input side |  |
| ESD-VERI-V | ESD Charging voltage measurement divider 20GOhm. ratio 1:20,000, Max. input voltage 32 kV. Input connector: MC. output connector: BNC |  |
| ESDEX-STAND | Carbon tripod support for ESD testing as per IEC 61000-4-2, ISO 10605. Adjustable Height (15 - 139 cm). ESDEX-CABLE-PULLBACK must be ordered separately |  |
| ESDEX-GND-SUPPORT | ESDEX return cable pullback stand for ESD waveform verification. In accordance with IEC 61000-4-2 Ed3. Requires ESDEX-STAND. |  |
| ESD-VCP50 | ESD Vertical Coupling Plate IEC 61000-4-2 with 2 x 470kOhm |  |
| ESD-BLEEDER-CABLE-150 | ESD cable 1.5m. 2 x 470kOhm Bleeder resistors acc. to IEC 61000-4-2. For use with HCP or deionization. Up to 30kV |  |
| ESD-BLEEDER-CABLE-200 | ESD cable 2m. 2 x 470kOhm Bleeder resistors acc. to IEC 61000-4-2. For use with HCP or deionization. Up to 30kV | |
| ESDEX-H-FIELDS | Magnetic field loop for ESDEX. Generates rapidly changing magnetic field for weak-points analysis. Can be used with ESDEX8, 16 and 30 |  |
| ESDEX-E-FIELDS | Electric field plate for ESDEX. Simulates static induction of E-Field for weak-points analysis. Can be used with ESDEX8, 16 and 30 |  |
| ESD-HCP-AUTO | ESD Indirect Coupling-Plane as per ISO 10605 appendix F |  |
| ESD-HCP-AUTO LARGE | ESD coupling plane as per ISO 10605 appendix F DUT area 600 x 500mm | |
| ESDEX-BATTPACK-4C | Powerful 4-Cells battery pack with 6900mAh for extended ESD testing. The ideal high-performance alternative to the standard battery |  |
Frequently Asked Questions
Can the ESDEX be upgraded after delivery?
Yes. The 16 kV version is upgradeable to 30 kV via factory upgrade. The 8 kV version is designed as an economical model and is not upgradeable.