EMC Solutions Header

 

Fiber Optic Converters

 

In complex EMC testing environments bidirectional transmission of electrical signals into and out of the chamber is often required. For that purpose we offer a variety of different interfaces that convert electrical signals into optical signals and back. Converting the electrical signals into optical signals makes them immune against electrical fields. A sophisticated shielding and filtering concept on the fiber optic converters ensures that the interfaces are highly immune against radiation and do not deliver out any significant emission. 


BROCHURE: PONTIS EMC PRODUCTS

DATASHEET: CONVERTER OVERVIEW


Features:

  • RF-Immunity: Antenna radiated 200 V/m, 200 MHz –18 GHz, ISO11452-2, CW, AM, PM / Stripline 200 V/m, 10 k – 1 GHz, ISO11452-5, CW, AM, PM
  • Emission: EMC compliant to CISPR25 Class 5, 150 k – 4 GHz
  • Mains powered or battery powered
  • Set of 2 converters
  • Variable fiber optic cable lengths (ST-ST or ST-FSMA)
  • Muliti mode duplex fiber, 50/125 um
  • Fiber optic patches (feed-through connectors for bulkhead connector panel)

CAN CONVERTER - foCAN

foCAN Converter
  • High speed ISO11989-2
  • 50 - 1000 kBaud data signaling rate
  • Transparent, unbuffered data transmission
  • Selectable CAN bus termination 120 Ohm, 60 Ohm or none
  • Can operate with 24V vehicles

ETHERNET CONVERTER - foEthernet

foEthernet Converter
  • Switchable: 100MBit/s / 1GBit/s
  • Bidirectional data transfer
  • 1x RJ45 Ethernet port (4 port version available on request)
  • ACK and network speed indication

USB CONVERTER - foUSB

foUSB Converter
  • High speed (480 Mbps), full speed (12 Mbps) and low speed (1.5 Mbps) data signaling rate
  • Unidirectional data transfer
  • Converter 1 - type USB B to connect with a PC
  • Converter 2 - type USB A to connect with any peripheral device

RS232 CONVERTER - foRS232

foRS232 Converter
  • 8 x In, 8 x Out, each channel "RxD + TxD, without handshake" or 4x, each channel "Rx + Tx + TRS + CTS, with handshake" data signaling rate
  • Bidirectional data transfer
  • Up to 115 kBaud data transfer rate
  • Converter 1 - satellite (shielded)
  • Converter 2 - transceiver (un-shielded)

HDMI CONVERTER - foHDMI

foHDMI Converter
  • Full HD 1080p, uncompressed
  • Unidirectional, 10.2 GBit/s high speed duplex transmission
  • HDMI up to version 1.2, real-time transmission without delay
  • Converter 1 - transmitter to connect to signal source
  • Converter 2 - receiver to connect with peripheral device

LIN CONVERTER - foLIN

foLIN Converter
  • Up to 20kBit/s data signaling rate
  • Bidirectional data transfer
  • Can operate with 24V vehicles
  • Switchable terminator
  • Switchable power: from LIN-bus

GPIB, RS485, VGA and FBAS converters also available. Please contact HV TECHNOLOGIES for further information.