TR-AS RC Remote Control Digital Recorder

The TR-AS RC digital recorder are designed for recording task only. The WinTR-AS software installed on the external control computer overtakes all control functions of the test procedure via the LAN

	TR-AS RC Remote Control Housing For connection via LAN (green) to the host computer (PC or Laptop) Measuring rack mount with 1 to 4 channels Direct input 100 mV to 10 V Measuring Input 12 V to 2000 V Suitable for IV tests and calibrations in the test field and on-site
	Working Desk with Measuring Rack MIRA 12 For reduction of electromagnetic interferences into the necessary connection cables and disturbances caused hereby Industrial PC Control Computer connected to the TR-AS digital recorder via Fiber LAN TR-AS RC Remote Control Housing Measuring rack mount with 1 to 4 channels Direct input 100 mV to 10 V Measuring Input 12 V to 2000 V

This new designed measuring technique of network controlled digital recorders gives the possibility for applications were
measuring channels are distributed in large test fields, in control rooms on-site or anywhere around the world via Internet.
 

1 WinTR-AS® measuring and evaluation software

The sophisticated measuring and evaluation software has an optional feature which enables external control through its own remote-interface. This can be used for automatic setup of all necessary settings, external operating mode (remotely start / stop of recording) and transmission of measuring results after recording.

2 WinTR-AS® RC – connection interface software for remote operation by alien IG control software

This software module works as an interface to adopt remote control commands from external, PC-operated Impulse Generator control units. It is currently capable to communicate with e.g. Haefely’s pc-based IG control device GC96, but can also be adapted to any other manufacturer’s PC-control software for Impulse Generator control