Easy to use Cable Locator
Baur CL 20
 |
Main features
- Graphics display with digital and barograph indication for signal strength
- Digital display of cable depth
- Current measurement for identification of target cable
- Automatic gain control by pushing a button
- 2 active transmitter frequencies and 50/60 Hz
- passive frequency selectable
- Powerful frequency transmitter with automatic
- load matching
- Simultaneous transmission of both active frequencies possible
|
The Cable Locator CL 20 is unchallenged for successful location in a variety of situations. Capable of locating long or short cables, inductive or directly coupled, using active transmitter frequencies or passive (50/60 Hz), the CL 20 is a light-weight, user friendly instrument in ergonomic design that delivers quick and
accurate readings. By activating a button the cable laying depth is indicated. For inductive coupling a Flexi-coupler is available, replacing the standard clip-on device. Its flexible design enables coupling of cables and pipes with a diameter up to 200 mm.
All in One - Cable Fault Location, Tracing, Depth evaluation
Baur Locator Set
 |
Main features
- Route tracing of cables and metallic gas and water pipes
- Depth evaluation of cables and metallic pipes
- Cable selection
- Cable detection on live lines
- Location of cable and line joints
- Accurate location of cable faults according to the twist method
- Accurate location of cable faults according to the acoustic method
- Acoustic pin pointing combined with propagation time measurement (indication of fault distance, only with BM 30)
|
The Locator Set is used for tracing and depth evaluation of cables. Using additional accessories, pin-point fault location is enabled by following methods acoustic method, step voltage method, twist method, acoustic propagation time measurement. The standard set consists of following components:
- Audio frequency transmitter - TG 20/50
- Audio frequency receiver - UL 7 or UL 30
- Detecting rod SP 8 or SP 30
- Headphone, KH 8
- 2 earth spikes
- 2 auxiliary lines on a hand reel
- Transport case
Universal Cable Fault Locator
Baur UL 30
 |
Main features
- Acoustic method including manhole distance location
- Accurate route tracing
- Digital indication of fault distance in meter
- Cable depth measurement
- Location of cable sheath faults
- Water resistant design
- Integrated loudspeaker
- Large illuminated LCD display
- Digital filters for suppression of traffic noise
- Easy menu operation
- Lightweight
|
For pin-pointing of cable faults the digital Universal Locator UL 30 is used with ground microphone BM 30 and Surge Voltage Generator (SSG/STG). With its integrated acoustic propagation time measurement the UL 30 displays the distance to fault in meter and indicates the position if the fault is reached. The special feature of UL 30 is the calculation of the fault distance between two manholes. In combination with audio frequency transmitter (TG) and detecting rod (SP 30) the UL 30 is used for route tracing and depth evaluation of electric lines and cables. Sheath fault location can be performed - using the available two earth probes - according to the step voltage method.
Easy to use, Portable Audio Frequency Transmitter
Baur TG 20 / 50
 |
Main features
- Automatic or manual impedance matching
- Charging unit and battery are incorporated, battery or mains operation
- Continuous or impulse mode selectable
- Two output frequencies selectable
- Illuminated instrument with display of (I) out and (I) in, switchable
- Terminals are free from touch
- High output power, therefore application of twist method possible
- Socket for loop antenna on side panel
|
High Performance Audio Frequency Transmitter
Baur TG 600
 |
Main features
- High output power 600 VA
- Frequency 2 or 10 kHz, quartz stabilized (other frequencies on request)
- Potential-free output
- Impedance matching in 8 steps, from 0.3 to 300 Ohms
- Selectable reactive current compensation for optimized power matching
- Thermal overload protection
- Indication of input and output current
|
The high performance Audio Frequency Transmitter TG 600 is especially designed for accurate location of cable faults and joints according to the twist method. The display of input and output current enables optimized impedance matching. A 600 VA and a 60 VA output power range are selectable. The 60 VA range is mainly used for route tracing and depth evaluation of cables.